How to Fix Crescent Grand 5 Hang Logo Problem with MT6572 Nand Flash File
If you are looking for a solution to fix the hang logo problem on your Crescent Grand 5 smartphone, you have come to the right place. In this article, we will show you how to flash the MT6572 Nand firmware on your device and restore it to normal operation.
The hang logo problem is a common issue that occurs when the device's software gets corrupted or damaged. This can happen due to various reasons, such as virus infection, improper installation of apps or updates, power failure, etc. When this happens, the device gets stuck on the boot screen and does not respond to any commands.
The only way to fix this problem is to flash the device with a new firmware that matches its hardware specifications. This will erase all the data and settings on the device and install a fresh copy of the operating system. However, before you proceed with this process, make sure you have backed up your important data and files to a safe location.
To flash the MT6572 Nand firmware on your Crescent Grand 5, you will need the following tools and files:
A Windows PC or laptop
A USB cable
A working battery for your device
The SP Flash Tool software (download from here)
The Crescent Grand 5 Flash File MT6572 Nand (download from here)
Once you have downloaded and extracted the files, follow these steps to flash your device:
Install the SP Flash Tool software on your PC or laptop and run it as administrator.
Click on the \"Scatter-loading\" button and browse to the folder where you extracted the Crescent Grand 5 Flash File MT6572 Nand. Select the \"MT6572_Android_scatter.txt\" file and click \"Open\".
Make sure all the boxes are checked and click on the \"Download\" button.
Turn off your device and remove the battery. Then connect it to your PC or laptop via USB cable while holding the volume down button.
The SP Flash Tool will detect your device and start flashing the firmware. Wait for the process to complete and do not disconnect or interrupt it.
Once the flashing is done, you will see a green tick mark on the screen. Disconnect your device and insert the battery. Then turn it on and wait for it to boot up.
Congratulations! You have successfully fixed the hang logo problem on your Crescent Grand 5 with MT6572 Nand Flash File. You can now enjoy using your device without any issues.
If you encounter any problems or errors during or after the flashing process, you can try the following troubleshooting tips:
Make sure you have downloaded the correct firmware file for your device model and chipset. Do not flash a firmware that is not compatible with your device.
Make sure you have installed the correct drivers for your device on your PC or laptop. You can download the drivers from here.
Make sure you have enough battery power on your device before flashing. It is recommended to charge your device to at least 50% before flashing.
Make sure you have a stable and reliable USB connection between your device and your PC or laptop. Do not use a faulty or damaged USB cable or port.
Make sure you have followed the flashing instructions carefully and correctly. Do not skip any steps or modify any settings.
If the flashing process gets stuck or fails, do not panic. Disconnect your device and try again. If the problem persists, try using a different PC or laptop or a different version of the SP Flash Tool software.
If none of these tips work, you can contact the customer support of Crescent Mobiles or visit their official website for more help and guidance. ec8f644aee